4-2 Aluminum SEU Service Entrance Cable Applications:
4-2 Aluminum SEU cable is used to transmit power from a service drop to a building’s meter base and then from the meter to the distribution panelboard or circuit box. Aluminum SEU cable is strung above ground and is the wire that connects the overhead power lines to a building or residence where power is being used. 4-2 Aluminum SEU Service Entrance Cable can also be used for a variety of other applications where this particular cable type is acceptable. This conductor is able to handle relatively high temperatures of up to 90°C and work efficiently in a wide range of climates.
Also Known As:
4-2 aluminum seu cable, 4-2 seu service entrance cable, 4-2 seu cable, 4-2 seu wire, 4-2 600v wire, 4-2 600v cable.
4-2 Aluminum SEU Service Entrance Cable Specifications:
|
Base Neutral Messenger Size AWG: |
7 |
|
Size AWG: |
4-2 |
|
Diameter Complete Cable (O.D.) (Mils): |
499 |
|
Weight Per 1000ft Total (Lbs.): |
129 |
|
Allowable Ampacity 60C (Amps): |
55 |
|
Allowable Ampacity 75C (Amps): |
65 |
|
Allowable Ampacity 90C (Amps): |
75 |
|
Allowable Ampacity Dwelling (Amps): |
-- |
4-2 Aluminum SEU Service Entrance Cable Construction:
Conductor - Aluminum SEU cable has a compact strand soft drawn 8000 series aluminum conductor, per ASTM B-801
Insulation - Aluminum SEU cable has a type XHHW-2 cross linked polyethylene (XLPE) insulation. The conductors are cabled together with an aluminum alloy concentric neutral and covered with a reinforced binder tape.
Jacket - Aluminum SEU cable has a gray sunlight resistance polyvinyl chloride (PVC) jacket.
4-2 Aluminum SEU Service Entrance Cable Standards:
Ampacities based on National Electric Code, 2005 edition, section 310-15
60°C when terminated to equipment for circuits rated 100 Amps or less or marked for 14 gauge through 1 gauge conductors
70°C when terminated to equipment for circuits rated over 100 Amps or marked for conductors larger than 1 gauge
90°C wet or dry locations
For dwelling units, conductors shall be permitted at listed ampacities to be utilized as 120/240 volt, 3-wire, single-phase service conductors that supply the total load
UL 44, 854
Federal Specification J-C - 30B
4-2 Aluminum SEU Service Entrance Cable why choose HuaDong?
Huadong Cable Group as a special 4-2 Aluminum SEU Service Entrance Cable factory in China, We not only have over 30 years of production experience and 15 years of export experience in Service Entrance Cable, but also we have 15 senior engineers, they can free design the Service Entrance Cable size according to client’s requirement.
Our 4-2 Aluminum SEU Service Entrance Cable export such as South Africa, Philippines, Indonesia, Malaysia, Singapore, Vietnam, Korea, Mongolia, Yemen, Cambodia, Thailand, Kenya, Tanzania, UAE, Botswana,Nigeria, Panama, Iran etc.High quality service and production are the first choice of many customers.
