5/16” (8.18 mm) MONOCONDUCTOR LOW RESISTANCE 1N32 – LR

5/16” (8.18 mm) MONOCONDUCTOR, LOW RESISTANCE 1N32 – LR PROPERTIES

Cable Diameter	0.322” +0.005” - 0.002”	(8.18mm + 0.13mm -0.05mm)
Minimum Sheave Diameter	18”	(46 cm)
Cable Stretch Coeffcient	1.2 ft/Kft/Klbs	(1.35 m/Km/5KN)

5/16” (8.18 mm) MONOCONDUCTOR, LOW RESISTANCE 1N32 – LR ELECTRICAL

Maximum Conductor Voltage	1,500 VDC
Conductor AWG Rating	13
Minimum Insulation Resistance	1,500 Mega Ω/Kft @ 500VDC	(457 Mega Ω/Km @ 500VDC)
Armor Electrical Resistance	2.1 Ω/Kft	(6.9 Ω/Km)

5/16” (8.18 mm) MONOCONDUCTOR, LOW RESISTANCE 1N32 – LR MECHANICAL

Cable Breaking Strength Ends Fixed	12,000 lbs	(53.3 KN) Nominal
Maximum Suggested Working Tension	6,000 lbs	(26.6 KN)
Number and Size of Wires
Inner Armor	12 x 0.0445”	(1.130 mm)
Outer Armor	18 x 0.0445”	(1.130 mm)
Average Wire Breaking Strength
Inner Armor	442 lbs	(1.97 KN)
Outer Armor	442 lbs	(1.97 KN)

Cable Type	Core Description							Cable Weight
	Temp Rating °F °C	Plastic Type	Insulation Thickness in mm	Copper Construction in mm	Res Typical Ω/Kft Ω/Km	Cap. Typical pf/ft pf/m	O.D. Each in mm	in Air	in H2O
								lbs/Kft Kg/Km
1N32PTZ-LR	500 260	FEP ETFE	0.017 0.432 0.018 0.444	19x0.0172 19x0.437	2.3 7.5	58 190	0.120 3.048 0.155 3.937	198 294	163 243

The armor wires are high tensile, Galvanized Extra Improved Plow Steel (GEIPS), and coated with anti-corrosion compound for
protection during shipping and storing. Wires are preformed.
Core assembly – Copper strand consists of a total of nineteen wires. Conductor resistance is measured at 68° F. Voids in the
copper strand are flled with a water-blocking agent to reduce water and gas migration.
SUPERSEAL, a special pressure seal agent, is applied between armor layers.
The temperature rating assumes a normal gradient for both temperature and weight.
All values shown are nominal or typical values.